ONLINE ORDERS for a limited time special - FLAT RATE SHIPPING IS ONLY $20 - excludes, mattresses, futons, toppers, beds and timber furniture

Bunk Beds – Single with optional mattress/futon bundle




MADE TO ORDER in Organature’s workshop using Australian hardwood.

100% Australian hardwood bunk, NO MDF, Chipboard or fumigation. Made in Our work shop in South Gippsland.

Different positions for the ladder: The ladder can be placed on the right or left hand side of the bed OR right or left hand side of the foot end.

Height: We are able to custom make that bunks to a specified height as well.

Suitable for a futon or innerspring:  If a mattress is purchased with the bunk, we offer 10% off the list price of the mattress.  Applies to one or two mattresses, and Innersprings or Futon combinations.

Available in 6 different finishes: Raw and Sanded (No Oil Finish) OR Plant Based Oiled in Clear, Ebony, Walnut, Dark Walnut, Rosewood and Smoked Oak. Additional price for any Oil finishes.

We source our oils from Livos who have a range of other colours, you may choose to purchase raw and sanded and apply the oils yourself, here is a link to the Livos website: Livos

Minimal glue used. Dries rockhard so no outgassing.

Bolts and Key supplied for easy assembly

Dimensions: 199 x 106 x 160 cm high

Delivery Time: Feel free to place your order, production time on most timber products is approx. up to 4 weeks.

For assembly instructions please refer to: Bunk Bed Assembly Instructions


There should be at least 2 metres clearance between the bunk bed and ceiling fans and lights.

If your bunk beds cannot be flush up against the bedroom wall, then allow a clear space greater than 230mm right around the bed.

Keep the floor are around the bunk free from hard toys or sharp objects, in case of a trip or fall.

A small light left on, can help children safely out of top bunk in the night.

Special Bundle Deal

If a mattress or futon is purchased with the bunk, we offer 10% off the price of these extra items.
This special deal applies to one or two mattresses, and Innersprings or Futon combinations.
Add your special discounted items to the cart from the options below.

Additional information

Weight 195 kg
Dimensions 218 x 126 x 16 cm
Timber Finishes

Raw and Sanded, Plant Based Oil Finish Clear, Plant Based Oil Finish Walnut, Plant Based Oil Finish Dark Walnut, Plant Based Oil Finish Smoked Oak, Plant Based Oil Finish Rosewood, Plant Based Oil Finish Ebony, Plant Based Oil Finish Limed White

Ladder Position

Left Side, Right Side, Foot End Left Side, Foot End Right Side

Assembly Instructions

BUNK BED ASSEMBLY INSTRUCTIONS – for any size Organature Bunk Bed.

  • Locate 4 x long vertical posts (the bolt holes that are the furtherest from the ends are the bottom of the posts)
  • Locate the 4 x rails that hold the slats and put the corresponding numbers against the posts.
  • Bolt together.
  • One of the long rails that holds the slats will bolt to the two short vertical posts.
  • Locate the 90mm x 19mm pieces of timber that bolt across the head & end of the bed.
  • Bolt together.
  • On the ladder end there is one more upright that needs to bolt in place where the numbers match up.
  • From there you should find all the corresponding numbers on the pieces of timber to match up and complete the bed.
  • Please note – the longer bolts included go into the rails that hold the slats.


There are no reviews yet.

Be the first to review “Bunk Beds – Single with optional mattress/futon bundle”

Product Enquiry