Our Barossa Bed base is like the Daylesford but without the Headboard. Made from 100% Victorian Mountain Ash Hardwood. Solid 140 x 32 mm timber frame with L shaped recessed legs to avoid stubbing toes. The legs are bolted with 2 external bolts on each corner to join the frame together. Then there are 2 internal bolts to hold the legs in place providing a stronger construction without the leg protrusion you can sometimes get on conventional beds. No toxic glue is used anywhere on the frame.
The Australian hardwood slat timber we are using at present are 65 x 19 mm, spacing is approx. 65 mm. This is an ideal combination to support an organic cotton futon and provide proper spacing for the special Bonnell springs used in our organic cotton innerspring mattresses. The slats sit level with the side frame. This is done so that the mattress gets maximum airing, essential with ANY mattress, and easier to make the bed as you don’t have struggle with hands between frame and mattress. The slats come in three panels, to avoid movement and secure fit in the base. And with the King and Super King an additional centre slat is added for support.
The outer rims of the mattress also sits on the outer 32 mm thick base frame, thus covering the slats. Standard platform heights 26 cm and 36 cm, other height options available between 37 – 60 cm, and this incurs an extra charge. Please specify the height in cm when placing your order if choosing a custom height between 37 – 60cm. Please note that while in the main photo the bolts are not visible, the additional photo shows the bolts clearly.
CUSTOMISATION: Also available as a Daylesford or with Hawthorn headboard option. If you wish to add the bed-head later you would have to screw it on with ordinary screws. When we supply the complete unit we supply special screws and have pre-fitted nuts in the frame end.
MADE TO ORDER in Organatures’ workshop using Australian hardwood. Using timber without chemical fumigation.
- Bed Bases are supplied flat packed.
- Bolts and keys supplied for easy assembly.
- Minimal glue used, dries rock hard so NO out-gassing.
- Suitable for innerspring or futon.
AVAILABLE BED SIZES:
SINGLE BED: Australian Bed Size to suit 910 × 1900 mm Innerspring Mattress or Futon
SINGLE LONG BED: Australian Bed Size to suit 910 × 2030 mm Innerspring Mattress or Futon
KING SINGLE BED: Australian Bed Size to suit 1070 × 2030 mm Innerspring Mattress or Futon
DOUBLE BED: Australian Bed Size to suit 1370 × 1900 mm Innerspring Mattress or Futon
QUEEN BED: Australian Bed Size to suit 1510 x 2030 mm Innerspring Mattress or Futon
KING BED: Australian Bed Size to suit 1830 x 2030 mm Innerspring Mattress or Futon
SUPER KING: Australian Bed Size to suit 2030 x 2030 mm Innerspring Mattress or Futon (Special Size Made To Order)
ORGANIC FINISHES: Choose raw and sanded, or with natural plant and mineral based oil. We source our oils from Livos who have a range of other colours, you may choose to purchase raw and sanded and apply the oils yourself, here is a link to the Livos website: Livos.
PLEASE NOTE: Our slat panels on the base of the bed are supplied raw and sanded. The slats are not generally seen once bed linen has been added. We believe it’s better to leave the slats themselves natural and reduce the risk of the oil being transferred onto your organic mattress.
ASSEMBLY: Our beds are not made for mattresses to sit inside a lip, so when constructing ensure the side frames of the bed are used with the small space facing up towards the ceiling. For assembly instructions please refer to: Bed Assembly Instructions Barossa Daylesford Mansfield Daintree Hawthorn Kingston Apollo Airley Windsor and Trundles
DELIVERY TIME Feel free to place your order, production time on most timber products is approx. up to 4 weeks.
OTHER STYLES TO CHOOSE FROM: Many other styles, heights and sizes available. See Beds Bunks Trundles.