Our Maldon Bed base is a solid base with a Head and Foot end. The upright headboard allows you to prop up the pillows and linger in bed a little longer enjoying your favourite book and a cup of tea. Solid 140 x 32 mm timber frame. It has three slat panels to avoid movement and an extra slat support for King and Super King sizes.
STANDARD PLATFORM HEIGHT: 360 mm, head posts 1200 mm, foot-end posts 900 mm; other height options for platform and posts available (see below).
AVAILABLE BED HEIGHTS:
- Headboard and foot-end height options are available: reduced heights at no extra charge. Increased heights at $50 per 10 cm increase, per head-end or foot-end.
- The standard platform height from floor to top of platform is 360 mm. Lower platform options are at no extra charge, for platform increased heights between 370-600 mm an additional $40 will be added.
- Contact us to order these other options
- Bed Bases are supplied flat packed.
- Bolts and keys supplied for easy assembly.
- Minimal glue used, dries rock hard so NO out-gassing.
- Suitable for innerspring or futon.
Note that the Katherine (low-rise or mid-rise) is the only recommended bed base for our HIGHLY CHEMICALLY SENSITIVE customers.
SLATS on all beds are glued, however the Katherine low-rise or mid-rise is the only style of bed with no glue used, and for a minimal extra charge, can have screwed slats (so no glue used at all!).
Footnote: Minimal PVA glue is used on all our bases and furniture; it is sandwiched between timbers, dries rockhard within 10 - 20 minutes after application and does not outgas.