Congratulations! You are the proud owner of the healthiest baby cot currently available in Australia
100% Australian-Made with Australian Timber, Quality Handcrafted and 100% Certified Organic
- Ensure this cot is safely assembled according to the instructions.
- For child safety, set the cot up away from blinds and curtains cords, heaters or any electrical appliances.
- Frames have been fully assembled with dowels and minimal hard drying glue which avoids any toxic outgassing.
- Decorative bolts together with key have been supplied for final assembling.
- To assemble match letters on the frame parts.
- Loosely assemble platform base into position, followed by side panels.
- Once all are in position tighten bolts; only with key provided — do not overtighten once the bolt feels tight.
- If bolt will not screw into bush/nut, which is inserted from the undersides, use a screwdriver to turn bush/nut.
The cot was fully assembled and checked before packing.
All timbers were fine sanded, however sometimes slight ‘Furring’ of timber may occur with cots supplied raw and sanded. This can be avoided by using a natural, non-petro chemical oil followed by a gentle polish with fine polishing steel wool or 150 grit sandpaper after oil is dry. Organature® use and recommend ‘Livos’ oil. Should you not wish to use oil, a light sanding with 150 grit sandpaper will smoothen this furring.
WARNING:
To prevent falls, the mattress base of this cot should be adjusted to the lowest regulation position before child can sit.